MX8260 Battery Monitor and Watt Meter

Accessories

On-Board / Hand Held RX Digital Battery Monitor

w/ MEMORY - MAH, AMPS, Watts & Load Test

Battery Monitor System and Watt Meter Set

By MPI

MX8260 On-Board DIGITAL RX Battery Monitor / LOG SET
Handheld Meter / Programmer with On-Board Unit

This digital battery monitor system is designed for all battery types from 3.5 to 10.0 volts up to 8000mah. You program the MAH of the connected battery and it will show you how much is left. It also will function as a watt meter, displays voltage, amps, watts and MAH drawn in real time. The on-board unit stores the MAH of the battery and MAH used in non-volatile memory so each flight of each plane will display the amount of MAH remaining.

Battery Monitor System and Watt Meter Set

Key Features:

Universal Connectors for fit Futaba, Hitec, JR and Airtronics Z
Compatible with Li-ion, Lipo, LiFePO4, NiXX
Voltage Range: 3.5 - 10VDC
Max Current - 10A
Max Set Capacity - 8000 MAH
Built- In 1A Load Test 2 4.8v
Light Weight - O/B Unit is only 0.33 oz
Dimensions of O/B Unit: 1.4 x .62 x .2 in
Handheld Monitor is approximately 3 1/2" x 1 3/4" x 6/8"
On-Board Unit available separately for multiple plane installation (coming soon)

Screen Displays:

Screen 1 shows Current, Voltage, Watt and MAH
Screen 2 shows set battery capacity & remaining capacity in MAH
Screen 3 shows max Amp and Min V Experienced
MEMORY holds when power is off, reset on demand

Check for proper operation before flying your model aircraft. Every effort is made to make this unit compatible with all systems, occasional compatibility issues with certain combinations of equipment are possible. ATS (or MPI) can't be responsible for systems that are not ground tested priori to flight.

MX8260 On-board Watt Meter / Battery Monitor system

Only $69.95

***We Gladly Accept Visa, MasterCard, Discover***

American Express & Electronic Checks using Paypal

[Home] [Support] [Ordering Info] [Company Info] [Contact Us] [Email Us]