ATS

PIPER CUB 10e ARF
The Piper Cub may be the most 'classic' of all the old-timers out there.  Like all the Hyperion 10e class models, this Piper Cub was designed from the ground up specifically for electric power.  Hyperion engineers gave much thought to the shape and location of the battery hatch, which is a prime concern for e-modelers.  Located on the bottom of the fuselage near the nose, the hatch allows instant access to the battery, and makes positioning the battery correctly easy - such that no ballast is needed to obtain proper balance of the model.

Using motors in the Z2213 class (we suggest Z2213-20) the Cub can be a graceful scale flyer using a 9x4.5 APC E prop, or very aerobatic using the 9x6 E propeller.  No matter how aggressively you choose to fly the Cub 10e, she looks just great in the air.  The Hyperion designers have built this model to nearly perfectly mimic the lines of the full-size cub, and added many details to make her 'just right'.  She's a beauty!
 
Recommended Parts
We strongly recommend that you purchase Hyperion kits with the "power set" option, for three good reasons:

First, the models are specifically developed for the power set, and extensively flight tested to insure both stunning performance and perfect reliability.

When you buy the kit with power set, both the Kit and the Power Set have discounts applied.  You save 10% or more on kit, motor, controller, adapter, and connectors.  And you can't get better quality parts, anywhere, at any price...

PIPER CUB 10e POWER SET
(also includes 3.5mm Gold Connectors for motor-ESC and Back-mount Set)
Z2213-20 MOTOR TITAN 20A BEC ESC Prop Adapter HP-ADAP-30L
 41.7g, 120W Peak Programmable by PC, Emeter, or Tx Keeps prop on the motor!

Suggested Components

Servos

Waypoint
W-092 Servos
 (four required)

Receiver

HP-DSP-4 or HP-DSP-6 (35/36/40Mhz)
Castle/Berg 4 channel to 7 Channel (72Mhz)

Servo Wire Extensions

One 4" (10cm) Extension for aileron is helpful, if you remove the wing after each flying day.
Battery

HP-LVX1500-3S
(lightest setup)

 HP-LCL2100-3S
(longest flight times)
Props APC 9x4.5 E (mildly aerobatic) or 9x6 "E" (more aerobatic)

Transmitter

4 channel minimum, 6ch+ preferred

ENJOY!  Copied with ACW permission.

 

[Home]  

 [Super Kraft ARF'S]   [ARF's]  [Electric ARF's]  [Electric RTF'S]  [Easy Built Model Kits]  [ATS 3 Blade Spinners]  [Tiger Shark Spinners]  [Spin Right Spinners]  [Mufflers & Glow Plugs]  [Megatech Engines]   [Accessories]   [Fuel Accessories]   [Glow Starters]   [Propellers]   [Handibond CA Glue]   [Extensions/Y Harness]   [Radio Systems]   [SK Engines]  [JBA Engines] [Support]  [Ordering Info]  [Company Info]  [Contact Us]  [Email Us]