Please read before using your new LipoSack
IMPORTANT USE AND SAFETY INSTRUCTIONS
Thank you for purchasing a LipoSack. Please read these instructions before
using your new LipoSack. Adherence to these simple instructions will ensure many
years of use of this product.
The use of a LipoSack does not guarantee total protection of surrounding
surfaces. It is simply intended to mitigate the effects of a battery failure
during charging or after a crash.
Battery safety:
∑ Lithium Polymer batteries are volatile. Failure to adhere to established charging guidelines may result in fire, personal injury and damage to property if charged or used improperly.
•The makers of LipoSack or its distributors or retailers assume no liability for
failures to comply with these use and safety guidelines.
•By purchasing this product, the buyer assumes all risks associated with its
intended use. If you cannot comply with these guidelines please return this
product unused to your retailer.
1) Charge batteries in a safe area away from flammable materials and only on
a non-flammable surface in a vented area. Do not discharge batteries below 3
volts/cell. Doing so may result in cell damage and subsequent cell venting upon
a subsequent charge.
2) Do not recharge damaged batteries. Dispose of damaged batteries in the proper
manner.
3) Some Lipo chargers on the market may have technical deficiencies that may
cause it to charge the battery incorrectly or at an improper rate. It is your
sole responsibility to assure that the charger you purchased works properly.
Always monitor the charging process to assure batteries are being charged
properly. Failure to do so may result in cell damage or fire.
4) In the event of a crash, you must remove the battery from the model for
observation and place in a safe open area away from flammable materials.
LipoSack Use Instructions:
1) Ensure that charger rate is properly set and polarity is correct.
2) Attach charging leads to battery.
3) Place battery in LipoSack towards the bottom.
4) Place LipoSack on non-flammable surface.
5) Route charge leads through vent at the top seam of the LipoSack.
6) Close top flap of LipoSack and press hook and loop closure fully closed.
7) Charge battery using proper charging practices.
FREE REPLACEMENT GUARANTEE
Avoid damage to the LipoSack. Replace if it becomes ripped, worn or is
involved in a battery failure.
If your LipoSack is involved in a failure resulting in a venting of the battery
and fire return it to LipoSack by contacting
sales@liposack.com with a statement of the circumstances and receive
a replacement LipoSack free of charge!