The SPINNER TYPE PROP NUT is made of  BEAUTIFULLY POLISHED Steel.

You can use this in place of a spinner and still use your electric starter or use as a nose weight to add a few ounces to your aircraft.  The spinner type prop nut looks GREAT, and is a VERY inexpensive way to have the look of a spinner!  They measure approximately 1 1/4" W X 1 1/4" H.

Spinner Type Prop Nuts

Available is the following sizes:

Polished Spinner Type Prop Nut  5/16 X 24

Polished Spinner Type Prop Nut   7mm x 1.00

OUT OF STOCK!

Aluminum Spinner Type Prop Nut

This Beautiful Aluminum Spinner Type Prop Nut features:

•  Dome shaped with a flange around the bottom

• Has a hole through it for tightening

• Made of Aluminum

• Light Weight

Width:  7/8" at the Flange

Height: 1"

Can be used with an electric starter!

Tighten the nut with a screwdriver, ball driver or steel rod

Spinner Type Prop Nuts

Available is the following sizes:

Spinner Type Prop Nut  5/16 X 24

Spinner Type Prop Nut   7mm x 1.00

Spinner Type Prop Nut   8mm x 1.00

Spinner Type Prop Nut   3/8  x 24

ONLY $6.99 EACH